Chapter 1. Troubleshooting and Debugging Apache HBase

Table of Contents

1.1. General Guidelines
1.2. Logs
1.2.1. Log Locations
1.2.2. Log Levels
1.2.3. JVM Garbage Collection Logs
1.3. Resources
1.3.2. Mailing Lists
1.3.3. IRC
1.3.4. JIRA
1.4. Tools
1.4.1. Builtin Tools
1.4.2. External Tools
1.5. Client
1.5.1. ScannerTimeoutException or UnknownScannerException
1.5.2. LeaseException when calling
1.5.3. Shell or client application throws lots of scary exceptions during normal operation
1.5.4. Long Client Pauses With Compression
1.5.5. ZooKeeper Client Connection Errors
1.5.6. Client running out of memory though heap size seems to be stable (but the off-heap/direct heap keeps growing)
1.5.7. Client Slowdown When Calling Admin Methods (flush, compact, etc.)
1.5.8. Secure Client Cannot Connect ([Caused by GSSException: No valid credentials provided (Mechanism level: Failed to find any Kerberos tgt)])
1.6. MapReduce
1.6.1. You Think You're On The Cluster, But You're Actually Local
1.7. NameNode
1.7.1. HDFS Utilization of Tables and Regions
1.7.2. Browsing HDFS for HBase Objects
1.8. Network
1.8.1. Network Spikes
1.8.2. Loopback IP
1.8.3. Network Interfaces
1.9. RegionServer
1.9.1. Startup Errors
1.9.2. Runtime Errors
1.9.3. Shutdown Errors
1.10. Master
1.10.1. Startup Errors
1.10.2. Shutdown Errors
1.11. ZooKeeper
1.11.1. Startup Errors
1.11.2. ZooKeeper, The Cluster Canary
1.12. Amazon EC2
1.12.1. ZooKeeper does not seem to work on Amazon EC2
1.12.2. Instability on Amazon EC2
1.12.3. Remote Java Connection into EC2 Cluster Not Working
1.13. HBase and Hadoop version issues
1.13.1. NoClassDefFoundError when trying to run 0.90.x on hadoop-0.20.205.x (or hadoop-1.0.x)
1.13.2. ...cannot communicate with client version...
1.14. Running unit or integration tests
1.14.1. Runtime exceptions from MiniDFSCluster when running tests
1.15. Case Studies

1.1. General Guidelines

Always start with the master log (TODO: Which lines?). Normally it’s just printing the same lines over and over again. If not, then there’s an issue. Google or should return some hits for those exceptions you’re seeing.

An error rarely comes alone in Apache HBase, usually when something gets screwed up what will follow may be hundreds of exceptions and stack traces coming from all over the place. The best way to approach this type of problem is to walk the log up to where it all began, for example one trick with RegionServers is that they will print some metrics when aborting so grepping for Dump should get you around the start of the problem.

RegionServer suicides are “normal”, as this is what they do when something goes wrong. For example, if ulimit and xcievers (the two most important initial settings, see ???) aren’t changed, it will make it impossible at some point for DataNodes to create new threads that from the HBase point of view is seen as if HDFS was gone. Think about what would happen if your MySQL database was suddenly unable to access files on your local file system, well it’s the same with HBase and HDFS. Another very common reason to see RegionServers committing seppuku is when they enter prolonged garbage collection pauses that last longer than the default ZooKeeper session timeout. For more information on GC pauses, see the 3 part blog post by Todd Lipcon and ??? above.

1.2. Logs

The key process logs are as follows... (replace <user> with the user that started the service, and <hostname> for the machine name)

NameNode: $HADOOP_HOME/logs/hadoop-<user>-namenode-<hostname>.log

DataNode: $HADOOP_HOME/logs/hadoop-<user>-datanode-<hostname>.log

JobTracker: $HADOOP_HOME/logs/hadoop-<user>-jobtracker-<hostname>.log

TaskTracker: $HADOOP_HOME/logs/hadoop-<user>-tasktracker-<hostname>.log

HMaster: $HBASE_HOME/logs/hbase-<user>-master-<hostname>.log

RegionServer: $HBASE_HOME/logs/hbase-<user>-regionserver-<hostname>.log

ZooKeeper: TODO

1.2.1. Log Locations

For stand-alone deployments the logs are obviously going to be on a single machine, however this is a development configuration only. Production deployments need to run on a cluster. NameNode

The NameNode log is on the NameNode server. The HBase Master is typically run on the NameNode server, and well as ZooKeeper.

For smaller clusters the JobTracker is typically run on the NameNode server as well. DataNode

Each DataNode server will have a DataNode log for HDFS, as well as a RegionServer log for HBase.

Additionally, each DataNode server will also have a TaskTracker log for MapReduce task execution.

1.2.2. Log Levels Enabling RPC-level logging

Enabling the RPC-level logging on a RegionServer can often given insight on timings at the server. Once enabled, the amount of log spewed is voluminous. It is not recommended that you leave this logging on for more than short bursts of time. To enable RPC-level logging, browse to the RegionServer UI and click on Log Level. Set the log level to DEBUG for the package org.apache.hadoop.ipc (Thats right, for hadoop.ipc, NOT, hbase.ipc). Then tail the RegionServers log. Analyze.

To disable, set the logging level back to INFO level.

1.2.3. JVM Garbage Collection Logs

HBase is memory intensive, and using the default GC you can see long pauses in all threads including the Juliet Pause aka "GC of Death". To help debug this or confirm this is happening GC logging can be turned on in the Java virtual machine.

To enable, in, uncomment one of the below lines :

# This enables basic gc logging to the .out file.
# export SERVER_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps"

# This enables basic gc logging to its own file.
# export SERVER_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH>"

# This enables basic GC logging to its own file with automatic log rolling. Only applies to jdk 1.6.0_34+ and 1.7.0_2+.
# export SERVER_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH> -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=1 -XX:GCLogFileSize=512M"

# If <FILE-PATH> is not replaced, the log file(.gc) would be generated in the HBASE_LOG_DIR.

At this point you should see logs like so:

64898.952: [GC [1 CMS-initial-mark: 2811538K(3055704K)] 2812179K(3061272K), 0.0007360 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
64898.953: [CMS-concurrent-mark-start]
64898.971: [GC 64898.971: [ParNew: 5567K->576K(5568K), 0.0101110 secs] 2817105K->2812715K(3061272K), 0.0102200 secs] [Times: user=0.07 sys=0.00, real=0.01 secs]

In this section, the first line indicates a 0.0007360 second pause for the CMS to initially mark. This pauses the entire VM, all threads for that period of time.

The third line indicates a "minor GC", which pauses the VM for 0.0101110 seconds - aka 10 milliseconds. It has reduced the "ParNew" from about 5.5m to 576k. Later on in this cycle we see:

64901.445: [CMS-concurrent-mark: 1.542/2.492 secs] [Times: user=10.49 sys=0.33, real=2.49 secs]
64901.445: [CMS-concurrent-preclean-start]
64901.453: [GC 64901.453: [ParNew: 5505K->573K(5568K), 0.0062440 secs] 2868746K->2864292K(3061272K), 0.0063360 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
64901.476: [GC 64901.476: [ParNew: 5563K->575K(5568K), 0.0072510 secs] 2869283K->2864837K(3061272K), 0.0073320 secs] [Times: user=0.05 sys=0.01, real=0.01 secs]
64901.500: [GC 64901.500: [ParNew: 5517K->573K(5568K), 0.0120390 secs] 2869780K->2865267K(3061272K), 0.0121150 secs] [Times: user=0.09 sys=0.00, real=0.01 secs]
64901.529: [GC 64901.529: [ParNew: 5507K->569K(5568K), 0.0086240 secs] 2870200K->2865742K(3061272K), 0.0087180 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
64901.554: [GC 64901.555: [ParNew: 5516K->575K(5568K), 0.0107130 secs] 2870689K->2866291K(3061272K), 0.0107820 secs] [Times: user=0.06 sys=0.00, real=0.01 secs]
64901.578: [CMS-concurrent-preclean: 0.070/0.133 secs] [Times: user=0.48 sys=0.01, real=0.14 secs]
64901.578: [CMS-concurrent-abortable-preclean-start]
64901.584: [GC 64901.584: [ParNew: 5504K->571K(5568K), 0.0087270 secs] 2871220K->2866830K(3061272K), 0.0088220 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
64901.609: [GC 64901.609: [ParNew: 5512K->569K(5568K), 0.0063370 secs] 2871771K->2867322K(3061272K), 0.0064230 secs] [Times: user=0.06 sys=0.00, real=0.01 secs]
64901.615: [CMS-concurrent-abortable-preclean: 0.007/0.037 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
64901.616: [GC[YG occupancy: 645 K (5568 K)]64901.616: [Rescan (parallel) , 0.0020210 secs]64901.618: [weak refs processing, 0.0027950 secs] [1 CMS-remark: 2866753K(3055704K)] 2867399K(3061272K), 0.0049380 secs] [Times: user=0.00 sys=0.01, real=0.01 secs]
64901.621: [CMS-concurrent-sweep-start]

The first line indicates that the CMS concurrent mark (finding garbage) has taken 2.4 seconds. But this is a _concurrent_ 2.4 seconds, Java has not been paused at any point in time.

There are a few more minor GCs, then there is a pause at the 2nd last line:

64901.616: [GC[YG occupancy: 645 K (5568 K)]64901.616: [Rescan (parallel) , 0.0020210 secs]64901.618: [weak refs processing, 0.0027950 secs] [1 CMS-remark: 2866753K(3055704K)] 2867399K(3061272K), 0.0049380 secs] [Times: user=0.00 sys=0.01, real=0.01 secs]

The pause here is 0.0049380 seconds (aka 4.9 milliseconds) to 'remark' the heap.

At this point the sweep starts, and you can watch the heap size go down:

64901.637: [GC 64901.637: [ParNew: 5501K->569K(5568K), 0.0097350 secs] 2871958K->2867441K(3061272K), 0.0098370 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
...  lines removed ...
64904.936: [GC 64904.936: [ParNew: 5532K->568K(5568K), 0.0070720 secs] 1365024K->1360689K(3061272K), 0.0071930 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
64904.953: [CMS-concurrent-sweep: 2.030/3.332 secs] [Times: user=9.57 sys=0.26, real=3.33 secs]

At this point, the CMS sweep took 3.332 seconds, and heap went from about ~ 2.8 GB to 1.3 GB (approximate).

The key points here is to keep all these pauses low. CMS pauses are always low, but if your ParNew starts growing, you can see minor GC pauses approach 100ms, exceed 100ms and hit as high at 400ms.

This can be due to the size of the ParNew, which should be relatively small. If your ParNew is very large after running HBase for a while, in one example a ParNew was about 150MB, then you might have to constrain the size of ParNew (The larger it is, the longer the collections take but if its too small, objects are promoted to old gen too quickly). In the below we constrain new gen size to 64m.

Add the below line in

export SERVER_GC_OPTS="$SERVER_GC_OPTS -XX:NewSize=64m -XX:MaxNewSize=64m"

Similarly, to enable GC logging for client processes, uncomment one of the below lines in

# This enables basic gc logging to the .out file.
# export CLIENT_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps"

# This enables basic gc logging to its own file.
# export CLIENT_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH>"

# This enables basic GC logging to its own file with automatic log rolling. Only applies to jdk 1.6.0_34+ and 1.7.0_2+.
# export CLIENT_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH> -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=1 -XX:GCLogFileSize=512M"

# If <FILE-PATH> is not replaced, the log file(.gc) would be generated in the HBASE_LOG_DIR .

For more information on GC pauses, see the 3 part blog post by Todd Lipcon and ??? above.

1.3. Resources

1.3.1. indexes all the mailing lists and is great for historical searches. Search here first when you have an issue as its more than likely someone has already had your problem.

1.3.2. Mailing Lists

Ask a question on the Apache HBase mailing lists. The 'dev' mailing list is aimed at the community of developers actually building Apache HBase and for features currently under development, and 'user' is generally used for questions on released versions of Apache HBase. Before going to the mailing list, make sure your question has not already been answered by searching the mailing list archives first. Use Section 1.3.1, “”. Take some time crafting your question[1]; a quality question that includes all context and exhibits evidence the author has tried to find answers in the manual and out on lists is more likely to get a prompt response.

1.3.3. IRC

#hbase on

1.3.4. JIRA

JIRA is also really helpful when looking for Hadoop/HBase-specific issues.

1.4. Tools

1.4.1. Builtin Tools Master Web Interface

The Master starts a web-interface on port 60010 by default.

The Master web UI lists created tables and their definition (e.g., ColumnFamilies, blocksize, etc.). Additionally, the available RegionServers in the cluster are listed along with selected high-level metrics (requests, number of regions, usedHeap, maxHeap). The Master web UI allows navigation to each RegionServer's web UI. RegionServer Web Interface

RegionServers starts a web-interface on port 60030 by default.

The RegionServer web UI lists online regions and their start/end keys, as well as point-in-time RegionServer metrics (requests, regions, storeFileIndexSize, compactionQueueSize, etc.).

See ??? for more information in metric definitions. zkcli

zkcli is a very useful tool for investigating ZooKeeper-related issues. To invoke:

./hbase zkcli -server host:port <cmd> <args>

The commands (and arguments) are:

	connect host:port
	get path [watch]
	ls path [watch]
	set path data [version]
	delquota [-n|-b] path
	printwatches on|off
	create [-s] [-e] path data acl
	stat path [watch]
	ls2 path [watch]
	listquota path
	setAcl path acl
	getAcl path
	sync path
	redo cmdno
	addauth scheme auth
	delete path [version]
	setquota -n|-b val path

1.4.2. External Tools tail

tail is the command line tool that lets you look at the end of a file. Add the “-f” option and it will refresh when new data is available. It’s useful when you are wondering what’s happening, for example, when a cluster is taking a long time to shutdown or startup as you can just fire a new terminal and tail the master log (and maybe a few RegionServers). top

top is probably one of the most important tool when first trying to see what’s running on a machine and how the resources are consumed. Here’s an example from production system:

top - 14:46:59 up 39 days, 11:55,  1 user,  load average: 3.75, 3.57, 3.84
Tasks: 309 total,   1 running, 308 sleeping,   0 stopped,   0 zombie
Cpu(s):  4.5%us,  1.6%sy,  0.0%ni, 91.7%id,  1.4%wa,  0.1%hi,  0.6%si,  0.0%st
Mem:  24414432k total, 24296956k used,   117476k free,     7196k buffers
Swap: 16008732k total,	14348k used, 15994384k free, 11106908k cached

15558 hadoop	18  -2 3292m 2.4g 3556 S   79 10.4   6523:52 java
13268 hadoop	18  -2 8967m 8.2g 4104 S   21 35.1   5170:30 java
 8895 hadoop	18  -2 1581m 497m 3420 S   11  2.1   4002:32 java

Here we can see that the system load average during the last five minutes is 3.75, which very roughly means that on average 3.75 threads were waiting for CPU time during these 5 minutes. In general, the “perfect” utilization equals to the number of cores, under that number the machine is under utilized and over that the machine is over utilized. This is an important concept, see this article to understand it more:

Apart from load, we can see that the system is using almost all its available RAM but most of it is used for the OS cache (which is good). The swap only has a few KBs in it and this is wanted, high numbers would indicate swapping activity which is the nemesis of performance of Java systems. Another way to detect swapping is when the load average goes through the roof (although this could also be caused by things like a dying disk, among others).

The list of processes isn’t super useful by default, all we know is that 3 java processes are using about 111% of the CPUs. To know which is which, simply type “c” and each line will be expanded. Typing “1” will give you the detail of how each CPU is used instead of the average for all of them like shown here. jps

jps is shipped with every JDK and gives the java process ids for the current user (if root, then it gives the ids for all users). Example:

hadoop@sv4borg12:~$ jps
1322 TaskTracker
17789 HRegionServer
27862 Child
1158 DataNode
25115 HQuorumPeer
2950 Jps
19750 ThriftServer
18776 jmx

In order, we see a:

  • Hadoop TaskTracker, manages the local Childs
  • HBase RegionServer, serves regions
  • Child, its MapReduce task, cannot tell which type exactly
  • Hadoop TaskTracker, manages the local Childs
  • Hadoop DataNode, serves blocks
  • HQuorumPeer, a ZooKeeper ensemble member
  • Jps, well… it’s the current process
  • ThriftServer, it’s a special one will be running only if thrift was started
  • jmx, this is a local process that’s part of our monitoring platform ( poorly named maybe). You probably don’t have that.

You can then do stuff like checking out the full command line that started the process:

hadoop@sv4borg12:~$ ps aux | grep HRegionServer
hadoop   17789  155 35.2 9067824 8604364 ?     S<l  Mar04 9855:48 /usr/java/jdk1.6.0_14/bin/java -Xmx8000m -XX:+DoEscapeAnalysis -XX:+AggressiveOpts -XX:+UseConcMarkSweepGC -XX:NewSize=64m -XX:MaxNewSize=64m -XX:CMSInitiatingOccupancyFraction=88 -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -Xloggc:/export1/hadoop/logs/gc-hbase.log -Dhbase.log.dir=/export1/hadoop/logs -Dhbase.log.file=hbase-hadoop-regionserver-sv4borg12.log -Dhbase.home.dir=/home/hadoop/hbase -Dhbase.root.logger=INFO,DRFA -Djava.library.path=/home/hadoop/hbase/lib/native/Linux-amd64-64 -classpath /home/hadoop/hbase/bin/../conf:[many jars]:/home/hadoop/hadoop/conf org.apache.hadoop.hbase.regionserver.HRegionServer start

jstack is one of the most important tools when trying to figure out what a java process is doing apart from looking at the logs. It has to be used in conjunction with jps in order to give it a process id. It shows a list of threads, each one has a name, and they appear in the order that they were created (so the top ones are the most recent threads). Here’s a few example:

The main thread of a RegionServer that’s waiting for something to do from the master:

      "regionserver60020" prio=10 tid=0x0000000040ab4000 nid=0x45cf waiting on condition [0x00007f16b6a96000..0x00007f16b6a96a70]
   java.lang.Thread.State: TIMED_WAITING (parking)
        	at sun.misc.Unsafe.park(Native Method)
        	- parking to wait for  <0x00007f16cd5c2f30> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
        	at java.util.concurrent.locks.LockSupport.parkNanos(
        	at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(
        	at java.util.concurrent.LinkedBlockingQueue.poll(

        	The MemStore flusher thread that is currently flushing to a file:
"regionserver60020.cacheFlusher" daemon prio=10 tid=0x0000000040f4e000 nid=0x45eb in Object.wait() [0x00007f16b5b86000..0x00007f16b5b87af0]
   java.lang.Thread.State: WAITING (on object monitor)
        	at java.lang.Object.wait(Native Method)
        	at java.lang.Object.wait(
        	- locked <0x00007f16cb14b3a8> (a org.apache.hadoop.ipc.Client$Call)
        	at org.apache.hadoop.ipc.RPC$Invoker.invoke(
        	at $Proxy1.complete(Unknown Source)
        	at sun.reflect.GeneratedMethodAccessor38.invoke(Unknown Source)
        	at sun.reflect.DelegatingMethodAccessorImpl.invoke(
        	at java.lang.reflect.Method.invoke(
        	at $Proxy1.complete(Unknown Source)
        	at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.closeInternal(
        	- locked <0x00007f16cb14b470> (a org.apache.hadoop.hdfs.DFSClient$DFSOutputStream)
        	at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.close(
        	at org.apache.hadoop.fs.FSDataOutputStream$PositionCache.close(
        	at org.apache.hadoop.fs.FSDataOutputStream.close(
        	at org.apache.hadoop.hbase.regionserver.StoreFile$Writer.close(
        	at org.apache.hadoop.hbase.regionserver.Store.internalFlushCache(
        	- locked <0x00007f16d00e6f08> (a java.lang.Object)
        	at org.apache.hadoop.hbase.regionserver.Store.flushCache(
        	at org.apache.hadoop.hbase.regionserver.Store.access$100(
        	at org.apache.hadoop.hbase.regionserver.Store$StoreFlusherImpl.flushCache(
        	at org.apache.hadoop.hbase.regionserver.HRegion.internalFlushcache(
        	at org.apache.hadoop.hbase.regionserver.HRegion.internalFlushcache(
        	at org.apache.hadoop.hbase.regionserver.HRegion.flushcache(
        	at org.apache.hadoop.hbase.regionserver.MemStoreFlusher.flushRegion(
        	at org.apache.hadoop.hbase.regionserver.MemStoreFlusher.flushRegion(

A handler thread that’s waiting for stuff to do (like put, delete, scan, etc):

"IPC Server handler 16 on 60020" daemon prio=10 tid=0x00007f16b011d800 nid=0x4a5e waiting on condition [0x00007f16afefd000..0x00007f16afefd9f0]
   java.lang.Thread.State: WAITING (parking)
        	at sun.misc.Unsafe.park(Native Method)
        	- parking to wait for  <0x00007f16cd3f8dd8> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
        	at java.util.concurrent.locks.LockSupport.park(
        	at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(
        	at java.util.concurrent.LinkedBlockingQueue.take(
        	at org.apache.hadoop.hbase.ipc.HBaseServer$

And one that’s busy doing an increment of a counter (it’s in the phase where it’s trying to create a scanner in order to read the last value):

"IPC Server handler 66 on 60020" daemon prio=10 tid=0x00007f16b006e800 nid=0x4a90 runnable [0x00007f16acb77000..0x00007f16acb77cf0]
   java.lang.Thread.State: RUNNABLE
        	at org.apache.hadoop.hbase.regionserver.KeyValueHeap.<init>(
        	at org.apache.hadoop.hbase.regionserver.StoreScanner.<init>(
        	at org.apache.hadoop.hbase.regionserver.Store.getScanner(
        	at org.apache.hadoop.hbase.regionserver.HRegion$RegionScanner.<init>(
        	at org.apache.hadoop.hbase.regionserver.HRegion.instantiateInternalScanner(
        	at org.apache.hadoop.hbase.regionserver.HRegion.getScanner(
        	at org.apache.hadoop.hbase.regionserver.HRegion.getScanner(
        	at org.apache.hadoop.hbase.regionserver.HRegion.getLastIncrement(
        	at org.apache.hadoop.hbase.regionserver.HRegion.incrementColumnValue(
        	at org.apache.hadoop.hbase.regionserver.HRegionServer.incrementColumnValue(
        	at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
        	at sun.reflect.DelegatingMethodAccessorImpl.invoke(
        	at java.lang.reflect.Method.invoke(
        	at org.apache.hadoop.hbase.ipc.HBaseRPC$
        	at org.apache.hadoop.hbase.ipc.HBaseServer$

A thread that receives data from HDFS:

"IPC Client (47) connection to sv4borg9/ from hadoop" daemon prio=10 tid=0x00007f16a02d0000 nid=0x4fa3 runnable [0x00007f16b517d000..0x00007f16b517dbf0]
   java.lang.Thread.State: RUNNABLE
        	at Method)
        	- locked <0x00007f17d5b68c00> (a$1)
        	- locked <0x00007f17d5b68be8> (a java.util.Collections$UnmodifiableSet)
        	- locked <0x00007f1877959b50> (a
        	at org.apache.hadoop.ipc.Client$Connection$
        	- locked <0x00007f1808539178> (a
        	at org.apache.hadoop.ipc.Client$Connection.receiveResponse(
        	at org.apache.hadoop.ipc.Client$

And here is a master trying to recover a lease after a RegionServer died:

"LeaseChecker" daemon prio=10 tid=0x00000000407ef800 nid=0x76cd waiting on condition [0x00007f6d0eae2000..0x00007f6d0eae2a70]
   java.lang.Thread.State: WAITING (on object monitor)
        	at java.lang.Object.wait(Native Method)
        	at java.lang.Object.wait(
        	- locked <0x00007f6d1cd28f80> (a org.apache.hadoop.ipc.Client$Call)
        	at org.apache.hadoop.ipc.RPC$Invoker.invoke(
        	at $Proxy1.recoverBlock(Unknown Source)
        	at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.processDatanodeError(
        	at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.<init>(
        	at org.apache.hadoop.hdfs.DFSClient.append(
        	at org.apache.hadoop.hdfs.DistributedFileSystem.append(
        	at org.apache.hadoop.fs.FileSystem.append(
        	at org.apache.hadoop.hbase.util.FSUtils.recoverFileLease(
        	at org.apache.hadoop.hbase.regionserver.wal.HLog.splitLog(
        	at org.apache.hadoop.hbase.regionserver.wal.HLog.splitLog(
        	at org.apache.hadoop.hbase.master.HMaster.splitLogAfterStartup(
        	at org.apache.hadoop.hbase.master.HMaster.joinCluster(

OpenTSDB is an excellent alternative to Ganglia as it uses Apache HBase to store all the time series and doesn’t have to downsample. Monitoring your own HBase cluster that hosts OpenTSDB is a good exercise.

Here’s an example of a cluster that’s suffering from hundreds of compactions launched almost all around the same time, which severely affects the IO performance: (TODO: insert graph plotting compactionQueueSize)

It’s a good practice to build dashboards with all the important graphs per machine and per cluster so that debugging issues can be done with a single quick look. For example, at StumbleUpon there’s one dashboard per cluster with the most important metrics from both the OS and Apache HBase. You can then go down at the machine level and get even more detailed metrics. clusterssh+top

clusterssh+top, it’s like a poor man’s monitoring system and it can be quite useful when you have only a few machines as it’s very easy to setup. Starting clusterssh will give you one terminal per machine and another terminal in which whatever you type will be retyped in every window. This means that you can type “top” once and it will start it for all of your machines at the same time giving you full view of the current state of your cluster. You can also tail all the logs at the same time, edit files, etc.

1.5. Client

For more information on the HBase client, see ???.

1.5.1. ScannerTimeoutException or UnknownScannerException

This is thrown if the time between RPC calls from the client to RegionServer exceeds the scan timeout. For example, if Scan.setCaching is set to 500, then there will be an RPC call to fetch the next batch of rows every 500 .next() calls on the ResultScanner because data is being transferred in blocks of 500 rows to the client. Reducing the setCaching value may be an option, but setting this value too low makes for inefficient processing on numbers of rows.

See ???.

1.5.2. LeaseException when calling

In some situations clients that fetch data from a RegionServer get a LeaseException instead of the usual Section 1.5.1, “ScannerTimeoutException or UnknownScannerException”. Usually the source of the exception is org.apache.hadoop.hbase.regionserver.Leases.removeLease( (line number may vary). It tends to happen in the context of a slow/freezing RegionServer#next call. It can be prevented by having hbase.rpc.timeout > Harsh J investigated the issue as part of the mailing list thread HBase, mail # user - Lease does not exist exceptions

1.5.3. Shell or client application throws lots of scary exceptions during normal operation

Since 0.20.0 the default log level for org.apache.hadoop.hbase.*is DEBUG.

On your clients, edit $HBASE_HOME/conf/ and change this: to this:, or even

1.5.4. Long Client Pauses With Compression

This is a fairly frequent question on the Apache HBase dist-list. The scenario is that a client is typically inserting a lot of data into a relatively un-optimized HBase cluster. Compression can exacerbate the pauses, although it is not the source of the problem.

See ??? on the pattern for pre-creating regions and confirm that the table isn't starting with a single region.

See ??? for cluster configuration, particularly hbase.hstore.blockingStoreFiles, hbase.hregion.memstore.block.multiplier, MAX_FILESIZE (region size), and MEMSTORE_FLUSHSIZE.

A slightly longer explanation of why pauses can happen is as follows: Puts are sometimes blocked on the MemStores which are blocked by the flusher thread which is blocked because there are too many files to compact because the compactor is given too many small files to compact and has to compact the same data repeatedly. This situation can occur even with minor compactions. Compounding this situation, Apache HBase doesn't compress data in memory. Thus, the 64MB that lives in the MemStore could become a 6MB file after compression - which results in a smaller StoreFile. The upside is that more data is packed into the same region, but performance is achieved by being able to write larger files - which is why HBase waits until the flushize before writing a new StoreFile. And smaller StoreFiles become targets for compaction. Without compression the files are much bigger and don't need as much compaction, however this is at the expense of I/O.

For additional information, see this thread on Long client pauses with compression.

1.5.5. ZooKeeper Client Connection Errors

Errors like this...

11/07/05 11:26:41 WARN zookeeper.ClientCnxn: Session 0x0 for server null,
 unexpected error, closing socket connection and attempting reconnect Connection refused: no further information
        at Method)
        at Source)
        at org.apache.zookeeper.ClientCnxn$
 11/07/05 11:26:43 INFO zookeeper.ClientCnxn: Opening socket connection to
 server localhost/
 11/07/05 11:26:44 WARN zookeeper.ClientCnxn: Session 0x0 for server null,
 unexpected error, closing socket connection and attempting reconnect Connection refused: no further information
        at Method)
        at Source)
        at org.apache.zookeeper.ClientCnxn$
 11/07/05 11:26:45 INFO zookeeper.ClientCnxn: Opening socket connection to
 server localhost/

... are either due to ZooKeeper being down, or unreachable due to network issues.

The utility Section, “zkcli” may help investigate ZooKeeper issues.

1.5.6. Client running out of memory though heap size seems to be stable (but the off-heap/direct heap keeps growing)

You are likely running into the issue that is described and worked through in the mail thread HBase, mail # user - Suspected memory leak and continued over in HBase, mail # dev - FeedbackRe: Suspected memory leak. A workaround is passing your client-side JVM a reasonable value for -XX:MaxDirectMemorySize. By default, the MaxDirectMemorySize is equal to your -Xmx max heapsize setting (if -Xmx is set). Try seting it to something smaller (for example, one user had success setting it to 1g when they had a client-side heap of 12g). If you set it too small, it will bring on FullGCs so keep it a bit hefty. You want to make this setting client-side only especially if you are running the new experiemental server-side off-heap cache since this feature depends on being able to use big direct buffers (You may have to keep separate client-side and server-side config dirs).

1.5.7. Client Slowdown When Calling Admin Methods (flush, compact, etc.)

This is a client issue fixed by HBASE-5073 in 0.90.6. There was a ZooKeeper leak in the client and the client was getting pummeled by ZooKeeper events with each additional invocation of the admin API.

1.5.8. Secure Client Cannot Connect ([Caused by GSSException: No valid credentials provided (Mechanism level: Failed to find any Kerberos tgt)])

There can be several causes that produce this symptom.

First, check that you have a valid Kerberos ticket. One is required in order to set up communication with a secure Apache HBase cluster. Examine the ticket currently in the credential cache, if any, by running the klist command line utility. If no ticket is listed, you must obtain a ticket by running the kinit command with either a keytab specified, or by interactively entering a password for the desired principal.

Then, consult the Java Security Guide troubleshooting section. The most common problem addressed there is resolved by setting system property value to false.

Because of a change in the format in which MIT Kerberos writes its credentials cache, there is a bug in the Oracle JDK 6 Update 26 and earlier that causes Java to be unable to read the Kerberos credentials cache created by versions of MIT Kerberos 1.8.1 or higher. If you have this problematic combination of components in your environment, to work around this problem, first log in with kinit and then immediately refresh the credential cache with kinit -R. The refresh will rewrite the credential cache without the problematic formatting.

Finally, depending on your Kerberos configuration, you may need to install the Java Cryptography Extension, or JCE. Insure the JCE jars are on the classpath on both server and client systems.

You may also need to download the unlimited strength JCE policy files. Uncompress and extract the downloaded file, and install the policy jars into <java-home>/lib/security.

1.6. MapReduce

1.6.1. You Think You're On The Cluster, But You're Actually Local

This following stacktrace happened using ImportTsv, but things like this can happen on any job with a mis-configuration.

    WARN mapred.LocalJobRunner: job_local_0001
java.lang.IllegalArgumentException: Can't read partitions file
       at org.apache.hadoop.hbase.mapreduce.hadoopbackport.TotalOrderPartitioner.setConf(
       at org.apache.hadoop.util.ReflectionUtils.setConf(
       at org.apache.hadoop.util.ReflectionUtils.newInstance(
       at org.apache.hadoop.mapred.MapTask$NewOutputCollector.<init>(
       at org.apache.hadoop.mapred.MapTask.runNewMapper(
       at org.apache.hadoop.mapred.LocalJobRunner$
Caused by: File _partition.lst does not exist.
       at org.apache.hadoop.fs.RawLocalFileSystem.getFileStatus(
       at org.apache.hadoop.fs.FilterFileSystem.getFileStatus(
       at org.apache.hadoop.fs.FileSystem.getLength(
       at org.apache.hadoop.hbase.mapreduce.hadoopbackport.TotalOrderPartitioner.readPartitions(

.. see the critical portion of the stack? It's...

       at org.apache.hadoop.mapred.LocalJobRunner$

LocalJobRunner means the job is running locally, not on the cluster.

To solve this problem, you should run your MR job with your HADOOP_CLASSPATH set to include the HBase dependencies. The "hbase classpath" utility can be used to do this easily. For example (substitute VERSION with your HBase version):

          HADOOP_CLASSPATH=`hbase classpath` hadoop jar $HBASE_HOME/hbase-VERSION.jar rowcounter usertable

See for more information on HBase MapReduce jobs and classpaths.

1.7. NameNode

For more information on the NameNode, see ???.

1.7.1. HDFS Utilization of Tables and Regions

To determine how much space HBase is using on HDFS use the hadoop shell commands from the NameNode. For example...

hadoop fs -dus /hbase/

...returns the summarized disk utilization for all HBase objects.

hadoop fs -dus /hbase/myTable

...returns the summarized disk utilization for the HBase table 'myTable'.

hadoop fs -du /hbase/myTable

...returns a list of the regions under the HBase table 'myTable' and their disk utilization.

For more information on HDFS shell commands, see the HDFS FileSystem Shell documentation.

1.7.2. Browsing HDFS for HBase Objects

Somtimes it will be necessary to explore the HBase objects that exist on HDFS. These objects could include the WALs (Write Ahead Logs), tables, regions, StoreFiles, etc. The easiest way to do this is with the NameNode web application that runs on port 50070. The NameNode web application will provide links to the all the DataNodes in the cluster so that they can be browsed seamlessly.

The HDFS directory structure of HBase tables in the cluster is...

     /<Table>             (Tables in the cluster)
          /<Region>           (Regions for the table)
               /<ColumnFamiy>      (ColumnFamilies for the Region for the table)
                    /<StoreFile>        (StoreFiles for the ColumnFamily for the Regions for the table)

The HDFS directory structure of HBase WAL is..

          /<RegionServer>    (RegionServers)
               /<HLog>           (WAL HLog files for the RegionServer)

See the HDFS User Guide for other non-shell diagnostic utilities like fsck. Zero size HLogs with data in them

Problem: when getting a listing of all the files in a region server's .logs directory, one file has a size of 0 but it contains data.

Answer: It's an HDFS quirk. A file that's currently being to will appear to have a size of 0 but once it's closed it will show its true size Use Cases

Two common use-cases for querying HDFS for HBase objects is research the degree of uncompaction of a table. If there are a large number of StoreFiles for each ColumnFamily it could indicate the need for a major compaction. Additionally, after a major compaction if the resulting StoreFile is "small" it could indicate the need for a reduction of ColumnFamilies for the table.

1.8. Network

1.8.1. Network Spikes

If you are seeing periodic network spikes you might want to check the compactionQueues to see if major compactions are happening.

See ??? for more information on managing compactions.

1.8.2. Loopback IP

HBase expects the loopback IP Address to be See the Getting Started section on ???.

1.8.3. Network Interfaces

Are all the network interfaces functioning correctly? Are you sure? See the Troubleshooting Case Study in Section 1.15, “Case Studies”.

1.9. RegionServer

For more information on the RegionServers, see ???.

1.9.1. Startup Errors Master Starts, But RegionServers Do Not

The Master believes the RegionServers have the IP of - which is localhost and resolves to the master's own localhost.

The RegionServers are erroneously informing the Master that their IP addresses are

Modify /etc/hosts on the region servers, from...

# Do not remove the following line, or various programs
# that require network functionality will fail.               fully.qualified.regionservername regionservername  localhost.localdomain localhost
::1             localhost6.localdomain6 localhost6

... to (removing the master node's name from localhost)...

# Do not remove the following line, or various programs
# that require network functionality will fail.               localhost.localdomain localhost
::1             localhost6.localdomain6 localhost6
     Compression Link Errors

Since compression algorithms such as LZO need to be installed and configured on each cluster this is a frequent source of startup error. If you see messages like this...

11/02/20 01:32:15 ERROR lzo.GPLNativeCodeLoader: Could not load native gpl library
java.lang.UnsatisfiedLinkError: no gplcompression in java.library.path
        at java.lang.ClassLoader.loadLibrary(
        at java.lang.Runtime.loadLibrary0(
        at java.lang.System.loadLibrary(

.. then there is a path issue with the compression libraries. See the Configuration section on LZO compression configuration.

1.9.2. Runtime Errors RegionServer Hanging

Are you running an old JVM (< 1.6.0_u21?)? When you look at a thread dump, does it look like threads are BLOCKED but no one holds the lock all are blocked on? See HBASE 3622 Deadlock in HBaseServer (JVM bug?). Adding -XX:+UseMembar to the HBase HBASE_OPTS in conf/ may fix it.

Also, are you using ???? These are discouraged because they can lock up the RegionServers if not managed properly. many open files)

If you see log messages like this...

2010-09-13 01:24:17,336 WARN org.apache.hadoop.hdfs.server.datanode.DataNode:
Disk-related IOException in BlockReceiver constructor. Cause is Too many open files
        at Method)

... see the Getting Started section on ulimit and nproc configuration. xceiverCount 258 exceeds the limit of concurrent xcievers 256

This typically shows up in the DataNode logs.

See the Getting Started section on xceivers configuration. System instability, and the presence of "java.lang.OutOfMemoryError: unable to create new native thread in exceptions" HDFS DataNode logs or that of any system daemon

See the Getting Started section on ulimit and nproc configuration. The default on recent Linux distributions is 1024 - which is far too low for HBase. DFS instability and/or RegionServer lease timeouts

If you see warning messages like this...

2009-02-24 10:01:33,516 WARN org.apache.hadoop.hbase.util.Sleeper: We slept xxx ms, ten times longer than scheduled: 10000
2009-02-24 10:01:33,516 WARN org.apache.hadoop.hbase.util.Sleeper: We slept xxx ms, ten times longer than scheduled: 15000
2009-02-24 10:01:36,472 WARN org.apache.hadoop.hbase.regionserver.HRegionServer: unable to report to master for xxx milliseconds - retrying

... or see full GC compactions then you may be experiencing full GC's. "No live nodes contain current block" and/or YouAreDeadException

These errors can happen either when running out of OS file handles or in periods of severe network problems where the nodes are unreachable.

See the Getting Started section on ulimit and nproc configuration and check your network. ZooKeeper SessionExpired events

Master or RegionServers shutting down with messages like those in the logs:

WARN org.apache.zookeeper.ClientCnxn: Exception
closing session 0x278bd16a96000f to TIMED OUT
       at org.apache.zookeeper.ClientCnxn$
WARN org.apache.hadoop.hbase.util.Sleeper: We slept 79410ms, ten times longer than scheduled: 5000
INFO org.apache.zookeeper.ClientCnxn: Attempting connection to server hostname/IP:PORT
INFO org.apache.zookeeper.ClientCnxn: Priming connection to java.nio.channels.SocketChannel[connected local=/IP:PORT remote=hostname/IP:PORT]
INFO org.apache.zookeeper.ClientCnxn: Server connection successful
WARN org.apache.zookeeper.ClientCnxn: Exception closing session 0x278bd16a96000d to Session Expired
       at org.apache.zookeeper.ClientCnxn$SendThread.readConnectResult(
       at org.apache.zookeeper.ClientCnxn$SendThread.doIO(
       at org.apache.zookeeper.ClientCnxn$
ERROR org.apache.hadoop.hbase.regionserver.HRegionServer: ZooKeeper session expired

The JVM is doing a long running garbage collecting which is pausing every threads (aka "stop the world"). Since the RegionServer's local ZooKeeper client cannot send heartbeats, the session times out. By design, we shut down any node that isn't able to contact the ZooKeeper ensemble after getting a timeout so that it stops serving data that may already be assigned elsewhere.

  • Make sure you give plenty of RAM (in, the default of 1GB won't be able to sustain long running imports.
  • Make sure you don't swap, the JVM never behaves well under swapping.
  • Make sure you are not CPU starving the RegionServer thread. For example, if you are running a MapReduce job using 6 CPU-intensive tasks on a machine with 4 cores, you are probably starving the RegionServer enough to create longer garbage collection pauses.
  • Increase the ZooKeeper session timeout

If you wish to increase the session timeout, add the following to your hbase-site.xml to increase the timeout from the default of 60 seconds to 120 seconds.


Be aware that setting a higher timeout means that the regions served by a failed RegionServer will take at least that amount of time to be transfered to another RegionServer. For a production system serving live requests, we would instead recommend setting it lower than 1 minute and over-provision your cluster in order the lower the memory load on each machines (hence having less garbage to collect per machine).

If this is happening during an upload which only happens once (like initially loading all your data into HBase), consider bulk loading.

See Section 1.11.2, “ZooKeeper, The Cluster Canary” for other general information about ZooKeeper troubleshooting. NotServingRegionException

This exception is "normal" when found in the RegionServer logs at DEBUG level. This exception is returned back to the client and then the client goes back to .META. to find the new location of the moved region.

However, if the NotServingRegionException is logged ERROR, then the client ran out of retries and something probably wrong. Regions listed by domain name, then IP

Fix your DNS. In versions of Apache HBase before 0.92.x, reverse DNS needs to give same answer as forward lookup. See HBASE 3431 RegionServer is not using the name given it by the master; double entry in master listing of servers for gorey details. Logs flooded with '2011-01-10 12:40:48,407 INFO Got brand-new compressor' messages

We are not using the native versions of compression libraries. See HBASE-1900 Put back native support when hadoop 0.21 is released. Copy the native libs from hadoop under hbase lib dir or symlink them into place and the message should go away. Server handler X on 60020 caught: java.nio.channels.ClosedChannelException

If you see this type of message it means that the region server was trying to read/send data from/to a client but it already went away. Typical causes for this are if the client was killed (you see a storm of messages like this when a MapReduce job is killed or fails) or if the client receives a SocketTimeoutException. It's harmless, but you should consider digging in a bit more if you aren't doing something to trigger them.

1.9.3. Shutdown Errors

1.10. Master

For more information on the Master, see ???.

1.10.1. Startup Errors Master says that you need to run the hbase migrations script

Upon running that, the hbase migrations script says no files in root directory.

HBase expects the root directory to either not exist, or to have already been initialized by hbase running a previous time. If you create a new directory for HBase using Hadoop DFS, this error will occur. Make sure the HBase root directory does not currently exist or has been initialized by a previous run of HBase. Sure fire solution is to just use Hadoop dfs to delete the HBase root and let HBase create and initialize the directory itself. Packet len6080218 is out of range!

If you have many regions on your cluster and you see an error like that reported above in this sections title in your logs, see HBASE-4246 Cluster with too many regions cannot withstand some master failover scenarios.

1.10.2. Shutdown Errors

1.11. ZooKeeper

1.11.1. Startup Errors Could not find my address: xyz in list of ZooKeeper quorum servers

A ZooKeeper server wasn't able to start, throws that error. xyz is the name of your server.

This is a name lookup problem. HBase tries to start a ZooKeeper server on some machine but that machine isn't able to find itself in the hbase.zookeeper.quorum configuration.

Use the hostname presented in the error message instead of the value you used. If you have a DNS server, you can set hbase.zookeeper.dns.interface and hbase.zookeeper.dns.nameserver in hbase-site.xml to make sure it resolves to the correct FQDN.

1.11.2. ZooKeeper, The Cluster Canary

ZooKeeper is the cluster's "canary in the mineshaft". It'll be the first to notice issues if any so making sure its happy is the short-cut to a humming cluster.

See the ZooKeeper Operating Environment Troubleshooting page. It has suggestions and tools for checking disk and networking performance; i.e. the operating environment your ZooKeeper and HBase are running in.

Additionally, the utility Section, “zkcli” may help investigate ZooKeeper issues.

1.12. Amazon EC2

1.12.1. ZooKeeper does not seem to work on Amazon EC2

HBase does not start when deployed as Amazon EC2 instances. Exceptions like the below appear in the Master and/or RegionServer logs:

  2009-10-19 11:52:27,030 INFO org.apache.zookeeper.ClientCnxn: Attempting
  connection to server
  2009-10-19 11:52:27,032 WARN org.apache.zookeeper.ClientCnxn: Exception
  closing session 0x0 to Connection refused

Security group policy is blocking the ZooKeeper port on a public address. Use the internal EC2 host names when configuring the ZooKeeper quorum peer list.

1.12.2. Instability on Amazon EC2

Questions on HBase and Amazon EC2 come up frequently on the HBase dist-list. Search for old threads using Search Hadoop

1.12.3. Remote Java Connection into EC2 Cluster Not Working

See Andrew's answer here, up on the user list: Remote Java client connection into EC2 instance.

1.13. HBase and Hadoop version issues

1.13.1. NoClassDefFoundError when trying to run 0.90.x on hadoop-0.20.205.x (or hadoop-1.0.x)

Apache HBase 0.90.x does not ship with hadoop-0.20.205.x, etc. To make it run, you need to replace the hadoop jars that Apache HBase shipped with in its lib directory with those of the Hadoop you want to run HBase on. If even after replacing Hadoop jars you get the below exception:

sv4r6s38: Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/commons/configuration/Configuration
sv4r6s38:       at org.apache.hadoop.metrics2.lib.DefaultMetricsSystem.<init>(
sv4r6s38:       at org.apache.hadoop.metrics2.lib.DefaultMetricsSystem.<clinit>(
sv4r6s38:       at
sv4r6s38:       at
sv4r6s38:       at
sv4r6s38:       at
sv4r6s38:       at<clinit>(
sv4r6s38:       at
sv4r6s38:       at

you need to copy under hbase/lib, the commons-configuration-X.jar you find in your Hadoop's lib directory. That should fix the above complaint.

1.13.2. ...cannot communicate with client version...

If you see something like the following in your logs ... 2012-09-24 10:20:52,168 FATAL org.apache.hadoop.hbase.master.HMaster: Unhandled exception. Starting shutdown. org.apache.hadoop.ipc.RemoteException: Server IPC version 7 cannot communicate with client version 4 ... ...are you trying to talk to an Hadoop 2.0.x from an HBase that has an Hadoop 1.0.x client? Use the HBase built against Hadoop 2.0 or rebuild your HBase passing the -Dhadoop.profile=2.0 attribute to Maven (See ??? for more).

1.14. Running unit or integration tests

1.14.1. Runtime exceptions from MiniDFSCluster when running tests

If you see something like the following

java.lang.NullPointerException: null
at org.apache.hadoop.hdfs.MiniDFSCluster.startDataNodes
at org.apache.hadoop.hdfs.MiniDFSCluster.<init>
at org.apache.hadoop.hbase.MiniHBaseCluster.<init>
at org.apache.hadoop.hbase.HBaseTestingUtility.startMiniDFSCluster
at org.apache.hadoop.hbase.HBaseTestingUtility.startMiniCluster


... Shutting down
at org.apache.hadoop.hbase.MiniHBaseCluster.init
at org.apache.hadoop.hbase.MiniHBaseCluster.<init>
at org.apache.hadoop.hbase.MiniHBaseCluster.<init>
at org.apache.hadoop.hbase.HBaseTestingUtility.startMiniHBaseCluster
at org.apache.hadoop.hbase.HBaseTestingUtility.startMiniCluster

... then try issuing the command umask 022 before launching tests. This is a workaround for HDFS-2556

1.15. Case Studies

For Performance and Troubleshooting Case Studies, see ???.

[1] See Getting Answers

comments powered by Disqus